2-445Cisco Catalyst Blade Switch 3120 for HP Command ReferenceOL-12248-03Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commandsshow archive statusshow archive statusUse the show archive status privileged EXEC command to display the status of a new image beingdownloaded to a switch with the HTTP or the TFTP protocol.show archive status [ | {begin | exclude | include} expression]Syntax DescriptionCommand Modes Privileged EXECCommand HistoryUsage Guidelines If you use the archive download-sw privileged EXEC command to download an image to a TFTPserver, the output of the archive download-sw command shows the status of the download.If you do not have a TFTP server, you can use Network Assistant or the embedded device manager todownload the image by using HTTP. The show archive status command shows the progress of thedownload.Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain outputare not displayed, but the lines that contain Output are displayed.Examples These are examples of output from the show archive status command:Switch# show archive statusIDLE: No upgrade in progressSwitch# show archive statusLOADING: Upgrade in progressSwitch# show archive statusEXTRACT: Extracting the imageSwitch# show archive statusVERIFY: Verifying softwareSwitch# show archive statusRELOAD: Upgrade completed. Reload pendingRelated Commands| begin (Optional) Display begins with the line that matches the expression.| exclude (Optional) Display excludes lines that match the expression.| include (Optional) Display includes lines that match the specified expression.expression Expression in the output to use as a reference point.Release Modification12.2(40)EX1 This command was introduced.Command Descriptionarchive download-sw Downloads a new image from a TFTP server to the switch.
