B-59Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command ReferenceOL-13271-03Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commandsdebug platform remote-commandsdebug platform remote-commandsUse the debug platform remote-commands privileged EXEC command to enable debugging of remotecommands. Use the no form of this command to disable debugging.debug platform remote-commandsno debug platform remote-commandsSyntax Description This command has no arguments or keywords.Defaults Debugging is disabled.Command Modes Privileged EXECCommand HistoryUsage Guidelines The undebug platform remote-commands command is the same as the no debug platformremote-commands command.On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. Toenable debugging on a stack member, you can start a session from the stack master by using the sessionswitch-number privileged EXEC command. Then enter the debug command at the command-lineprompt of the stack member. You also can use the remote command stack-member-number LINEprivileged EXEC command on the stack master switch to enable debugging on a member switch withoutfirst starting a session.Related CommandsRelease Modification12.2(40)EX1 This command was introduced.Command Descriptionshow debugging Displays information about the types of debugging that are enabled.
