2-684Cisco Catalyst Blade Switch 3120 for HP Command ReferenceOL-12248-03Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commandsshow vtpshow vtpUse the show vtp user EXEC command to display general information about the VLAN TrunkingProtocol (VTP) management domain, status, and counters.show vtp {counters | password | status} [ | {begin | exclude | include} expression]Syntax DescriptionCommand Modes User EXECCommand HistoryUsage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain outputdo not appear, but the lines that contain Output appear.Examples This is an example of output from the show vtp counters command.Switch> show vtp countersVTP statistics:Summary advertisements received : 0Subset advertisements received : 0Request advertisements received : 0Summary advertisements transmitted : 0Subset advertisements transmitted : 0Request advertisements transmitted : 0Number of config revision errors : 0Number of config digest errors : 0Number of V1 summary errors : 0VTP pruning statistics:Trunk Join Transmitted Join Received Summary advts received fromnon-pruning-capable device---------------- ---------------- ---------------- ---------------------------Gi1/0/47 0 0 0Gi1/0/48 0 0 0Gi2/0/1 0 0 0Gi3/0/2 0 0 0counters Display the VTP statistics for the switch.password Display the configured VTP password.status Display general information about the VTP management domain status.| begin (Optional) Display begins with the line that matches the expression.| exclude (Optional) Display excludes lines that match the expression.| include (Optional) Display includes lines that match the specified expression.expression Expression in the output to use as a reference point.Release Modification12.2(40)EX1 This command was introduced.
