B-66Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command ReferenceOL-13271-03Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commandsdebug platform tcamdebug platform tcamUse the debug platform tcam privileged EXEC command to enable debugging of hardware memoryaccess and lookups. Use the no form of this command to disable debugging.debug platform tcam {log | read | search | write}debug platform tcam log l2 {acl {input | output} | local | qos}debug platform tcam log l3 {acl {input | output} | ipv6 {acl {input | output} | local | qos |secondary} | local | qos | secondary}debug platform tcam read {reg | ssram | tcam}debug platform tcam searchdebug platform tcam write {forw-ram | reg | tcam}no debug platform tcam {log | read | search | write}no debug platform tcam log l2 {acl {input | output} | local | qos}no debug platform tcam log l3 {acl {input | output} | ipv6 {acl {input | output} | local | qos |secondary} | local | qos | secondary}no debug platform tcam read {reg | ssram | tcam}no debug platform tcam searchno debug platform tcam write {forw-ram | reg | tcam}
