B-50Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command ReferenceOL-13271-03Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commandsdebug platform matmdebug platform matmUse the debug platform matm privileged EXEC command to enable debugging of platform-dependentMAC address management. Use the no form of this command to disable debugging.debug platform matm {aging | all | ec-aging | errors | learning | rpc | secure-address | warnings}no debug platform matm {aging | all | ec-aging | errors | learning | rpc | secure-address |warnings}Syntax DescriptionDefaults Debugging is disabled.Command Modes Privileged EXECCommand HistoryUsage Guidelines The undebug platform matm command is the same as the no debug platform matm command.On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. Toenable debugging on a stack member, you can start a session from the stack master by using the sessionswitch-number privileged EXEC command. Then enter the debug command at the command-lineprompt of the stack member. You also can use the remote command stack-member-number LINEprivileged EXEC command on the stack master switch to enable debugging on a member switch withoutfirst starting a session.Related Commandsaging Display MAC address aging debug messages.all Display all platform MAC address management event debug messages.ec-aging Display EtherChannel address aging-related debug messages.errors Display MAC address management error messages.learning Display MAC address management address-learning debug messages.rpc Display MAC address management remote procedure call (RPC) related debugmessages.secure-address Display MAC address management secure address learning debug messages.warning Display MAC address management warning messages.Release Modification12.2(40)EX1 This command was introduced.Command Descriptiondebug matm Displays information about platform-independent MAC address management.show debugging Displays information about the types of debugging that are enabled.
