1-11z When there are multiple Telnet users or dumb terminal users, they share some configurationparameters including module filter, language and severity level threshold. In this case, change toany such parameter made by one user will also be reflected on all other user terminals.z To view debugging information of specific modules, you need to set the information type as debugwhen setting the system information output rules, and enable debugging for correspondingmodules through the debugging command.Enabling system information display on a monitor terminalAfter setting to output system information to a monitor terminal, you need to enable the associateddisplay function in order to display the output information on the monitor terminal.Follow these steps to enable the display of system information on a monitor terminal:To do… Use the command… RemarksEnable the debugging/log/trapinformation terminal display function terminal monitor OptionalEnabled by defaultEnable debugging information terminaldisplay function terminal debugging OptionalDisabled by defaultEnable log information terminal displayfunction terminal logging OptionalEnabled by defaultEnable trap information terminal displayfunction terminal trapping OptionalEnabled by defaultMake sure that the debugging/log/trap information terminal display function is enabled (use theterminal monitor command) before you enable the corresponding terminal display function by usingthe terminal debugging, terminal logging, or terminal trapping command.Setting to Output System Information to a Log HostFollow these steps to set to output system information to a log host:To do… Use the command… RemarksEnter system view system-view —Enable the informationcenter info-center enable OptionalEnabled by default.
