1-125) Configuring jitter test on HWPing clientFollow these steps to configure jitter test on HWPing client:To do… Use the command… RemarksEnter system view system-view —Enable the HWPing client function hwping-agent enableRequiredBy default, the HWPing clientfunction is disabled.Create an HWPing test group andenter its viewhwping administrator-nameoperation-tagRequiredBy default, no test group isconfigured.Configure the test type test-type jitter [ codeccodec-value ]RequiredBy default, the test type is ICMP.Configure the destination IPaddress destination-ip ip-addressRequiredThe destination address must bethe IP address of a UDP listeningservice on the HWPing server.By default, no destination addressis configured.Configure the destination port destination-portPort-numberRequiredThe destination port must be theport of a UDP listening service onthe HWPing server.By default, no destination port isconfigured.Configure the source IP address source-ip ip-addressOptionalBy default, no source IP address isconfigured.Configure the source port source-port port-numberOptionalBy default, no source port isconfigured.Configure the number of probesper test count timesOptionalBy default, each test makes oneprobe.Configure the maximum number ofhistory records that can be saved history-records numberOptionalBy default, the maximum number is50.Configure the packet size datasize sizeOptionalBy default, the packet size is 68bytes.Configure a stuffing characterstring datafill stringOptionalBy default, the numbers between 0and 255 are stuffed into datagramsin a cyclically way.Configure a test description description stringOptionalBy default, no descriptioninformation is configured.Enable history record history-record enableOptionalBy default, history record is notenabled.
