2-10# Set the local password to 123456 (in plain text).[Sysname-ui-aux0] set authentication password simple 123456# Specify commands of level 2 are available to users logging in to the AUX user interface.[Sysname-ui-aux0] user privilege level 2# Set the baud rate of the console port to 19,200 bps.[Sysname-ui-aux0] speed 19200# Set the maximum number of lines the screen can contain to 30.[Sysname-ui-aux0] screen-length 30# Set the maximum number of commands the history command buffer can store to 20.[Sysname-ui-aux0] history-command max-size 20# Set the timeout time of the AUX user interface to 6 minutes.[Sysname-ui-aux0] idle-timeout 6After the above configuration, you need to modify the configuration of the terminal emulation utilityrunning on the PC accordingly in the dialog box shown in Figure 2-4 to log in to the switch successfully.Console Port Login Configuration with Authentication Mode BeingSchemeConfiguration ProcedureFollow these steps to configure console port login with the authentication mode being scheme:To do… Use the command… RemarksEnter system view system-view —Enter the defaultISP domain view domain domain-nameSpecify the AAAscheme to beapplied to thedomainscheme { local | none |radius-schemeradius-scheme-name [ local ] |hwtacacs-schemehwtacacs-scheme-name[ local ] }Configuretheauthentication modeQuit to systemview quitOptionalBy default, the local AAA scheme isapplied.If you specify to apply the local AAAscheme, you need to perform theconfiguration concerning local useras well.If you specify to apply an existingscheme by providing theradius-scheme-name argument, youneed to perform the followingconfiguration as well:Perform AAA&RADIUS configurationon the switch. (Refer to the AAA partfor more.)Configure the user name andpassword accordingly on the AAAserver. (Refer to the user manual ofAAA server.)Create a local user (Enter localuser view.) local-user user-name RequiredNo local user exists by default.Set the authentication passwordfor the local userpassword { simple | cipher }password RequiredSpecify the service type for AUXusersservice-type terminal [ levellevel ] RequiredQuit to system view quit —Enter AUX user interface view user-interface aux 0 —
