3-2To do... Use the command... RemarksConfigure the current switchto be an HABP server habp server vlan vlan-idRequiredBy default, a switch operatesas an HABP client after youenable HABP on the switch. Ifyou want to use the switch as amanagement switch, you needto configure the switch to be anHABP server.Configure the interval tosend HABP requestpackets.habp timer intervalOptionalThe default interval for anHABP server to send HABPrequest packets is 20 seconds.HABP Client ConfigurationHABP clients reside on switches attached to HABP servers. After you enable HABP for aswitch, the switch operates as an HABP client by default. So you only need to enable HABPon a switch to make it an HABP client.Follow these steps to configure an HABP client:To do... Use the command... RemarksEnter system view system-view —Enable HABP habp enableOptionalHABP is enabled by default.And a switch operates as anHABP client after you enableHABP for it.Displaying and Maintaining HABP ConfigurationTo do... Use the command... RemarksDisplay HABP configurationand status display habp Available in any viewDisplay the MAC address tablemaintained by HABP display habp table Available in any viewDisplay statistics on HABPpackets display habp traffic Available in any view