2-21To do… Use the command… Remarksinterface quitDHCP clientsConfiguremultipleinterfaces insystem viewdhcp server nbns-list ip-address&<1-8> { interfaceinterface-type interface-number [ to interface-typeinterface-number ] | all }WINS serveraddress isconfigured.interface interface-type interface-numberdhcp server netbios-type { b-node | h-node |m-node | p-node }Configure thecurrentinterfacequitConfigure aNetBIOS nodetype for DHCPclients Configuremultipleinterfaces insystem viewdhcp server netbios-type { b-node | h-node |m-node | p-node } { interface interface-typeinterface-number [ to interface-typeinterface-number ] | all }RequiredBy default, noNetBIOS nodetype is specified.If b-node is specified for the client, you don’t need to specify any WINS server address.Configuring BIMS Server Information for the DHCP ClientA DHCP client performs regular software update and backup using configuration files obtained from aBIMS server. Therefore, the DHCP server needs to offer DHCP clients the BIMS server IP address, portnumber, shared key from the DHCP address pool.Follow these steps to configure BIMS server information for the DHCP client:To do… Use the command… RemarksEnter system view system-view —Configure the BIMS serverinformation to be assigned to theDHCP clientdhcp server bims-server ipip-address [ port port-number ]sharekey key { interfaceinterface-type interface-number[ to interface-typeinterface-number ] | all }RequiredBy default, no BIMS serverinformation is configured.Configuring Option 184 Parameters for the Client with Voice ServiceFor details about Option 184, refer to Configuring Option 184 Parameters for the Client with VoiceService.
