1-12View Availableoperation Prompt example Enter method Quit methodHWPing test groupviewConfigure HWPingtest groupparameters[Sysname-hwping-a123-a123]Execute the hwpingcommand in systemview.HWTACACS viewConfigureHWTACACSparameters[Sysname-hwtacacs-a123]Execute thehwtacacs schemecommand in systemview.MSDP view Configure MSDPparameters [Sysname-msdp]Execute the msdpcommand in systemview.PoE profile view Configure PoEprofile parameters[Sysname-poe-profile-a123]Execute thepoe-profilecommand in systemview.Smart link groupviewConfigure smart linkgroup parameters[Sysname-smlk-group1]Execute thesmart-link groupcommand in systemview.Monitor link groupviewConfigure monitorlink groupparameters[Sysname-mtlk-group1]Execute themonitor-link groupcommand in systemview.Detected groupviewConfigure detectedgroup parameters[Sysname-detect-group-1]Execute thedetect-groupcommand in systemview.QinQ view Configure QinQparameters[Sysname-GigabitEthernet1/0/1-vid-20]Execute the vlan-vpnvid command inGigabitEthernet portview.The vlan-vpn enablecommand should befirst executed.Execute the quitcommand toreturn toGigabitEthernetport view.Execute thereturn commandto return to userview.The shortcut key is equivalent to the return command.Tips on Using the CLIUsing the CLI Online HelpIn the CLI, you can type a question mark (?) to obtain detailed online help. See the following examples.Type ? in any view to display all commands available in this view and brief descriptions about thesecommands. ?User view commands:
