1-14Trap interval : 5sFast start times : 3Port 1 [GigabitEthernet1/0/1]:Port status of LLDP : EnableAdmin status : Rx_OnlyTrap flag : NoRoll time : 0sNumber of neighbors : 1Number of MED neighbors : 1Number of CDP neighbors : 0Number of sent optional TLV : 0Number of received unknown TLV : 0Port 2 [GigabitEthernet1/0/2]:Port status of LLDP : EnableAdmin status : Rx_OnlyTrap flag : NoRoll time : 0sNumber of neighbors : 1Number of MED neighbors : 0Number of CDP neighbors : 0Number of sent optional TLV : 0Number of received unknown TLV : 3As the sample output shows, GigabitEthernet 1/0/1 of Switch A connects a MED device, andGigabitEthernet 1/0/2 of Switch A connects a non-MED device. Both ports operate in Rx mode, that is,they only receive LLDP frames.# Tear down the link between Switch A and Switch B and then display the global LLDP status and portLLDP status on Switch A.[SwitchA] display lldp statusGlobal status of LLDP : EnableThe current number of LLDP neighbors : 1The current number of CDP neighbors : 0LLDP neighbor information last changed time: 0 days,0 hours,5 minutes,20 secondsTransmit interval : 30sHold multiplier : 4Reinit delay : 2sTransmit delay : 2sTrap interval : 5sFast start times : 3Port 1 [GigabitEthernet1/0/1]:Port status of LLDP : EnableAdmin status : Rx_OnlyTrap flag : NoRoll time : 0sNumber of neighbors : 1
