1-29Jitter result:RTT Number:100Min Positive SD:1 Min Positive DS:1Max Positive SD:6 Max Positive DS:8Positive SD Number:38 Positive DS Number:25Positive SD Sum:85 Positive DS Sum:42Positive SD average:2 Positive DS average:1Positive SD Square Sum:267 Positive DS Square Sum:162Min Negative SD:1 Min Negative DS:1Max Negative SD:6 Max Negative DS:8Negative SD Number:30 Negative DS Number:24Negative SD Sum:64 Negative DS Sum: 41Negative SD average:2 Negative DS average:1Negative SD Square Sum:200 Negative DS Square Sum:161SD lost packets number:0 DS lost packet number:0Unknown result lost packet number:0[Sysname-hwping-administrator-Jitter] display hwping history administrator JitterHWPing entry(admin administrator, tag Jitter) history record:Index Response Status LastRC Time1 274 1 0 2000-04-02 08:14:58.22 278 1 0 2000-04-02 08:14:57.93 280 1 0 2000-04-02 08:14:57.64 279 1 0 2000-04-02 08:14:57.35 280 1 0 2000-04-02 08:14:57.16 270 1 0 2000-04-02 08:14:56.87 275 1 0 2000-04-02 08:14:56.58 263 1 0 2000-04-02 08:14:56.29 270 1 0 2000-04-02 08:14:56.010 275 1 0 2000-04-02 08:14:55.7For detailed output description, see the corresponding command manual.SNMP TestNetwork requirementsBoth the HWPing client and the SNMP Agent are H3C S5600 series Ethernet switches. PerformHWPing SNMP tests between the two switches to test the time required from Switch A sends an SNMPquery message to Switch B (SNMP Agent) to it receives a response from Switch B.Network diagramFigure 1-7 Network diagram for the SNMP testConfiguration procedurez Configure SNMP Agent (Switch B):# Start SNMP agent and set SNMP version to V2C, read-only community name to public, andread-write community name to private.
