1-9z In userLogin mode, neither NTK nor intrusion protection will be triggered. In any otherport security mode, the two features will be triggered upon detection of illegal frames.z In userLoginWithOUI mode, intrusion protection will not be triggered even if the OUIvalue does not match.z When a port operates in either the macAddressElseUserLoginSecure mode or themacAddressElseUserLoginSecureExt mode, intrusion protection will be triggeredonly after both MAC authentication and 802.1X authentication on the same packet fail.Port Security Configuration Task ListComplete the following tasks to configure port security:Task RemarksEnabling Port Security RequiredSetting the Maximum Number of Secure MAC Addresses Allowed on aPort OptionalSetting the Port Security Mode RequiredConfiguring the NTK featureConfiguring intrusion protectionConfiguring Port SecurityFeaturesConfiguring trappingOptionalChoose one or morefeatures as required.Configuring Guest VLAN for a Port in macAddressOrUserLoginSecuremode OptionalIgnoring the Authorization Information from the RADIUS Server OptionalConfiguring Secure MAC Addresses OptionalEnabling Port SecurityConfiguration PrerequisitesBefore enabling port security, disable 802.1X and MAC authentication globally.Enabling Port SecurityFollow these steps to enable port security:
