2-29To do… Use the command… RemarksDelete buffered non-responsestop-accounting requestsreset stop-accounting-bufferhwtacacs-schemehwtacacs-scheme-nameAAA Configuration ExamplesPer User Type AAA Configuration ExampleNetwork RequirementsAs shown in Figure 2-2, Host A, serving as an 802.1X user, accesses the network through Ethernet1/0/1 of Switch, and Host B, serving as a telnet user, accesses the network through Ethernet 1/0/2 ofSwitch.z Configure the switch to use the RADIUS server to provide authentication, authorization, andaccounting services for users. The IP address of the server is 10.110.91.164.z Set the shared keys for authentication, authorization, and accounting packets exchanged with theRADIUS server to aabbcc. Configure the switch to remove the domain name from a usernamebefore sending the username to the RADIUS server.z Configure the switch to perform RADIUS authentication for Host A and local authentication forHost B.Figure 2-2 Configure different authentication methods based on user access typesConfiguration Procedure# Enter system view. system-view# Configure the authentication method for telnet users.[Switch] user-interface vty 0 4[Switch-ui-vty0-4] authentication-mode scheme# Configure the test domain.[Switch] domain test[Switch-isp-test] access-limit enable 10[Switch-isp-test] quit# Configure RADIUS scheme radius1.
