1-11View Availableoperation Prompt example Enter method Quit methodOSPF area view Configure OSPFarea parameters[Sysname-ospf-1-area-0.0.0.1]Execute the areacommand in OSPFview.Execute the quitcommand toreturn to OSPFview.Execute thereturn commandto return to userview.BGP view Configure BGPprotocol parameters [Sysname-bgp]Execute the bgpcommand in systemviewExecute the quitcommand toreturn to systemview.Execute thereturn commandto return to userview.BGP IPv4 multicastaddress family viewConfigure the BGPIPv4 address family[Sysname-bgp-af-mul]Execute theipv4-familymulticast commandin OSPF viewExecute the quitcommand toreturn to BGPview.Execute thereturn commandto return to userview.Routing policy view Configure routingpolicy[Sysname-route-policy]Execute theroute-policycommand in systemview.Basic ACL viewDefine rules for abasic ACL (with IDranging from 2000to 2999)[Sysname-acl-basic-2000]Execute the aclnumber command insystem view.Advanced ACLviewDefine rules for anadvanced ACL (withID ranging from3000 to 3999)[Sysname-acl-adv-3000]Execute the aclnumber command insystem view.Layer 2 ACL viewDefine rules for anlayer 2 ACL (with IDranging from 4000to 4999)[Sysname-acl-ethernetframe-4000]Execute the aclnumber command insystem view.User-defined ACLviewDefine rules for auser-defined ACL(with ID rangingfrom 5000 to 5999)[Sysname-acl-user-5000]Execute the aclnumber command insystem view.QoS profile view Define QoS profile [Sysname-qos-profile-a123]Execute theqos-profilecommand in systemview.RADIUS schemeviewConfigure RADIUSscheme parameters [Sysname-radius-1]Execute the radiusscheme command insystem view.ISP domain view Configure ISPdomain parameters[Sysname-isp-aaa123.net]Execute the domaincommand in systemview.Execute the quitcommand toreturn to systemview.Execute thereturn commandto return to userview.
