1-15To do… Use the command… RemarksEnable the dynamic domain nameresolution function dns resolve RequiredDisabled by default.Configure an IPv6 DNS server dns server ipv6 ipv6-address[ interface-type interface-number ]RequiredIf the IPv6 address of the DNSserver is a link-local address, theinterface-type andinterface-number arguments arerequired.Configure the domain suffix. dns domain domain-nameRequiredBy default, no domain name suffixis configured, that is, the domainname is resolved according to theinput information.The dns resolve and dns domain commands are the same as those of IPv4 DNS. For details aboutthe commands, refer to DNS Operation in this manual.Displaying and Maintaining IPv6To do… Use the command… RemarksDisplay DNS domain name suffixinformation display dns domain [ dynamic ]Display IPv6 dynamic domainname cache information. display dns ipv6 dynamic-hostDisplay DNS server information display dns server [ dynamic ]Display the FIB entries display ipv6 fibDisplay the mapping between hostname and IPv6 address display ipv6 hostDisplay the brief IPv6 informationof an interfacedisplay ipv6 interface[ interface-type interface-number |brief ]Display neighbor informationdisplay ipv6 neighbors[ ipv6-address | all | dynamic |interface interface-typeinterface-number | static | vlanvlan-id ] [ | { begin | exclude |include } regular-expression ]Display the total number ofneighbor entries satisfying thespecified conditionsdisplay ipv6 neighbors { all |dynamic | static | interfaceinterface-type interface-number |vlan vlan-id } countDisplay information about therouting tabledisplay ipv6 route-table[ verbose ]Display information related to aspecified socketdisplay ipv6 socket [ socktypesocket-type ] [ task-id socket-id ]Available in any view