1-4Task RemarksCreate a smart link groupAdd member ports to the smart linkgroupConfiguring a Smart LinkDevice Enable the function of sending flushmessages in the specified controlVLANRequiredConfiguring AssociatedDevicesEnable the function of processing flushmessages received from the specifiedcontrol VLANRequiredConfiguring a Smart Link DeviceA Smart Link device refers to a device on which Smart Link is enabled and a smart link group isconfigured, and that sends flush messages from the specified control VLAN. A member port of a smartlink group can be either an Ethernet port or a manually-configured or static LACP aggregation group.You can configure a port or a link aggregation group as a member of a smart link group.Follow these steps to configure Smart Link (with ports as the members of the smart link group):To do… Use the command… RemarksEnter system view system-view —Create a smart link group andenter smart link group view smart-link group group-id RequiredEnable the function of sendingflush messages in the specifiedcontrol VLANflush enable control-vlan vlan-idRequiredBy default, nocontrol VLAN forsending flushmessages isspecified.smart link groupviewport interface-type interface-number { master |slave }quitinterface interface-type interface-numberConfigure aport as asmart linkgroupmember Ethernet portviewport smart-link group group-id { master | slave }RequiredUse eitherapproachFollow these steps to configure Smart Link (with link aggregation groups are the members of the smartlink group):To do… Use the command… RemarksEnter system view system-view —Create a smart link group and entersmart link group view smart-link group group-id RequiredConfigure a link aggregation groupas a member of the smart linkgrouplink-aggregation group group-id{ master | slave } Optional
