1-16To do… Use the command… RemarksDisplay the statistics of IPv6packets and IPv6 ICMP packets display ipv6 statisticsDisplay the statistics of IPv6 TCPpackets display tcp ipv6 statisticsDisplay the IPv6 TCP connectionstatus display tcp ipv6 statusDisplay the statistics of IPv6 UDPpackets display udp ipv6 statisticsClear IPv6 dynamic domain namecache information reset dns ipv6 dynamic-hostClear IPv6 neighbor informationreset ipv6 neighbors [ all |dynamic | interface interface-typeinterface-number | static ]Clear the statistics of IPv6 packets reset ipv6 statisticsClear the statistics of all IPv6 TCPpackets reset tcp ipv6 statisticsClear the statistics of all IPv6 UDPpackets reset udp ipv6 statisticsAvailable in user viewThe display dns domain and display dns server commands are the same as those of IPv4 DNS. Fordetails about the commands, refer to DNS Operation in this manual.IPv6 Configuration ExampleIPv6 Unicast Address ConfigurationNetwork requirementsTwo switches are directly connected through two Ethernet ports. The Ethernet ports belong to VLAN 2.Different types of IPv6 addresses are configured for the interface VLAN-interface 2 on each switch toverify the connectivity between the two switches. The IPv6 prefix in the EUI-64 format is 2001::/64, theglobal unicast address of Switch A is 3001::1/64, and the global unicast address of Switch B is3001::2/64.Network diagramFigure 1-5 Network diagram for IPv6 address configurationConfiguration procedure1) Configure Switch A.
