1-43[SwitchB-Vlan-interface1] ip address 10.165.87.136 255.255.255.0[SwitchB-Vlan-interface1] quitGenerating the RSA and DSA key pairs on the server is prerequisite to SSH login.# Generate RSA and DSA key pairs.[SwitchB] public-key local create rsa[SwitchB] public-key local create dsa# Set the authentication mode for the user interfaces to AAA.[SwitchB] user-interface vty 0 4[SwitchB-ui-vty0-4] authentication-mode scheme# Enable the user interfaces to support SSH.[SwitchB-ui-vty0-4] protocol inbound ssh[SwitchB-ui-vty0-4] quit# Create local user client001, and set the authentication password to abc, the login protocol to SSH,and user command privilege level to 3.[SwitchB] local-user client001[SwitchB-luser-client001] password simple abc[SwitchB-luser-client001] service-type ssh level 3[SwitchB-luser-client001] quit# Configure the authentication type of user client001 as password.[SwitchB] ssh user client001 authentication-type passwordz Configure Switch A# Create a VLAN interface on the switch and assign an IP address, which serves as the SSH client’saddress in an SSH connection. system-view[SwitchA] interface vlan-interface 1[SwitchA-Vlan-interface1] ip address 10.165.87.137 255.255.255.0[SwitchA-Vlan-interface1] quit# Establish a connection to the server 10.165.87.136.[SwitchA] ssh2 10.165.87.136Username: client001Trying 10.165.87.136 ...Press CTRL+K to abortConnected to 10.165.87.136 ...The Server is not authenticated. Do you continue to access it?(Y/N):yDo you want to save the server's public key?(Y/N):nEnter password:After you enter the correct password, you can log into Router B successfully.
