1-8The configurations of different units in the fabric system can be saved in different .cfg configuration fileson the TFTP server. These configuration files form the startup configuration of the whole fabric.File Backup and RestorationConfiguration prerequisitesBefore performing the following operations, you must first ensure that:z The relevant units support TFTP client.z The TFTP server is startedz A route exists between the TFTP server and TFTP client.Configuration procedureFollow these steps to back up and restore configuration file:To do… Use the command… RemarksBack up the current configurationof a specified unitbackup unit unit-idcurrent-configuration to{ dest-addr | dest-hostname }filename.cfgOptionalAvailable in user viewBack up the current configurationof the whole fabric systembackup fabriccurrent-configuration to{ dest-addr | dest-hostname }filename.cfgOptionalAvailable in user viewRestore the startup configuration ofa specified unitrestore unit unit-idstartup-configuration from{ source-addr | source-hostname }filename.cfgOptionalAvailable in user viewRestore the startup configuration ofthe whole fabric systemrestore fabricstartup-configuration from{ source-addr | source-hostname }filename.cfgOptionalAvailable in user view
