1-23# Enable the HWPing client. system-view[Sysname] hwping-agent enable# Create an HWPing test group, setting the administrator name to administrator and test tag to DHCP.[Sysname] hwping administrator dhcp# Configure the test type as dhcp.[Sysname-hwping-administrator-dhcp] test-type dhcp# Configure the source interface, which must be a VLAN interface. Make sure the DHCP server resideson the network connected to this interface.[Sysname-hwping-administrator-dhcp] source-interface Vlan-interface 1# Configure to make 10 probes per test.[Sysname-hwping-administrator-dhcp] count 10# Set the probe timeout time to 5 seconds.[Sysname-hwping-administrator-dhcp] timeout 5# Start the test.[Sysname-hwping-administrator-dhcp] test-enable# Display test results[Sysname-hwping-administrator-dhcp] display hwping results administrator dhcpHWPing entry(admin administrator, tag dhcp) test result:Send operation times: 10 Receive response times: 10Min/Max/Average Round Trip Time: 1018/1037/1023Square-Sum of Round Trip Time: 10465630Last complete test time: 2000-4-3 9:51:30.9Extend result:SD Maximal delay: 0 DS Maximal delay: 0Packet lost in test: 0%Disconnect operation number: 0 Operation timeout number: 0System busy operation number: 0 Connection fail number: 0Operation sequence errors: 0 Drop operation number: 0Other operation errors: 0[Sysname-hwping-administrator-dhcp] display hwping history administrator dhcpHWPing entry(admin administrator, tag dhcp) history record:Index Response Status LastRC Time1 1018 1 0 2000-04-03 09:51:30.92 1037 1 0 2000-04-03 09:51:22.93 1024 1 0 2000-04-03 09:51:18.94 1027 1 0 2000-04-03 09:51:06.85 1018 1 0 2000-04-03 09:51:00.86 1020 1 0 2000-04-03 09:50:52.87 1018 1 0 2000-04-03 09:50:48.88 1020 1 0 2000-04-03 09:50:36.89 1020 1 0 2000-04-03 09:50:30.810 1028 1 0 2000-04-03 09:50:22.8For detailed output description, see the corresponding command manual.
