1-5Task RemarksEnabling Destination MAC Address Triggered Update OptionalAssigning MAC Addresses for Ethernet Ports OptionalConfiguring a MAC Address EntryYou can add, modify, or remove a MAC address entry, remove all MAC address entries concerning aspecific port, or remove specific type of MAC address entries (dynamic or static MAC address entries).You can add a MAC address entry in either system view or Ethernet port view.Adding a MAC address entry in system viewFollow these steps to add a MAC address entry in system view:To do… Use the command… RemarksEnter system view system-view —Add a MAC address entrymac-address { static | dynamic | blackhole }mac-address interface interface-type interface-numbervlan vlan-idRequiredz When you add a MAC address entry, the port specified by the interface argument must belong tothe VLAN specified by the vlan argument in the command. Otherwise, the entry will not be added.z If the VLAN specified by the vlan argument is a dynamic VLAN, after a static MAC address isadded, it will become a static VLAN.Adding a MAC address entry in Ethernet port viewFollow these steps to add a MAC address entry in Ethernet port view:To do… Use the command… RemarksEnter system view system-view —Enter Ethernet port view interface interface-typeinterface-number —Add a MAC address entrymac-address { static | dynamic |blackhole } mac-address vlanvlan-idRequired