5.5 Lighting the Backlight (Backlight)The backlight is equipped on the back side of the LCD on the transceiver. By lighting the backlight, the LCD can be viewedin dark places or at night.Pressing the Backlight key toggles the backlight between On and Off.If Auto Backlight is enabled, the backlight lights when operating any key of the transceiver, or when receiving a call. Theconditions for lighting the backlight by the Auto Backlight function can be configured by using KPG-D1/ D1N.0 PTT PressIf PTT Press is enabled, the backlight lights when the PTT switch is pressed.0 Any Key OperationIf Any Key Operation is enabled, the backlight lights when any key other than the PTT switch is operated.0 ID/Message ReceptionIf ID/Message Reception is enabled, the backlight lights when the transceiver receives the following various calls andmessages:Table 5-1 List of Calls Lighting the Backlight when ID/Message Reception Is EnabledNXDNConventionalIndividual CallIndividual Call Acknowledge RequestGroup CallPaging CallStatus MessageShort MessageTrunkingIndividual CallIndividual Call (Message Trunked (Enhanced))Group Call/ Broadcast Group CallGroup Call/ Broadcast Group Call (Message Trunked (Enhanced))Paging CallStatus MessageShort MessageP25ConventionalIndividual CallGroup CallEmergency CallTrunkingIndividual Call (No Availability Check)Individual Call (Availability Check)Paging CallGroup Call/ Announcement Group/ Super Group CallSystem CallTelephone CallEmergency Call5 INDICATION AND DISPLAY5.5 Lighting the Backlight (Backlight)Common FUNC (K, F)/Ver 2.20 91CONTENTS INDEX