0 If the data is written to the transceiver and the transceiver’s password is configured1 Turn the Transceiver ON.A Power-on Tone A (1 beep) sounds from the transceiver, and then ananimated logo appears for 500 ms.If Custom Start-up Screen is configured, a Power-on Tone A (1 beep)sounds from the transceiver when the transceiver is turned ON and thebitmapped image configured for the transceiver appears for 2 sec. (Referto Displaying a Bitmap Image When the Transceiver is Turned ON (CustomStart-up Screen).)“Password” appears after “SELF TESTING” appears. (Refer to Passwordfor Transceiver Operation (Transceiver Password).)Note0 The animated logo appears only if Custom-Start-up Screen is notconfigured.0 In the following cases, if the transceiver is turned ON, the transceiverenters Transceiver Password Mode:0 If Transceiver Password is configured, “Transceiver Password”is not assigned to any of the PF keys, and “Transceiver Password”is not configured in Menu Mode0 When “Transceiver Password” is assigned to one of the PF keys,or when “Transceiver Password” is configured for Menu Mode, ifthe transceiver is turned OFF while the transceiver is inTransceiver Password Mode2 Enter a password.Refer to “Entering or Deleting a Code” for entry methods.When the correct password is entered, a Password Authorization Tone (2beeps) sounds from the transceiver, and then the password protection ofthe transceiver is disabled.If Power-on Text is configured, the Power-on Text appears for 2 sec.(Refer to Power-on Text.)The transceiver enters User Mode, and then the channel name appears.12 : 34 AMPasswordInput Password12 : 34 AMPassword0123DeleteConfrmMenu Zone +Zone 1Channel 112 : 34 AM3 BASIC OPERATIONS3.1 Turning the Transceiver ON/ OFFCommon FUNC (K, F)/Ver 2.20 27CONTENTS INDEX
