15.3 Copying the Configuration Data to Another Transceiver (CloneMode)Clone Mode can be used to copy the data configured for the transceiver to another transceiver.Operating the transceiver1 Turn the transceiver ON while pressing and holding the Function ([ ]) key.The transceiver enters Clone Mode.CloneCLONE MODENote0 Refer to the service manual for instructions on how to operate the transceiver in Clone Mode, and for details on the Clonefunction.0 To end Clone Mode, the transceiver must be turned OFF.0 The following data cannot be copied in Clone Mode:0 Tuning Data0 Embedded Message with Password0 KENWOOD ESN Data0 P25 ESN Data0 NXDN ESN Data0 If the data is copied to a transceiver having a different firmware version number, this may result in an error or a failure ofthe transceiver to function correctly. In such a case, the cloned transceiver operation must be verified prior to using thistransceiver on a regular basis.0 Clone Mode does not function in a Multi RF Deck system for Mobile.Configuration using KPG-D1/ D1NConfiguring whether to permit the use of Clone Mode ( Transceiver Settings > Optional Features > Optional Features1 > Mode)15 MODE15.3 Copying the Configuration Data to Another Transceiver (Clone Mode)Common FUNC (K, F)/Ver 2.20 242CONTENTS INDEX
