Configuration using KPG-D1/ D1N0 Configuring Bluetooth Headset Connection Type (Control Head 2) ( Transceiver Settings > Optional Features> Optional Features 2 > GPS/Bluetooth > Bluetooth > Control Head 2)0 Configuring Bluetooth Headset Connection Type (Portable) ( Transceiver Settings > Optional Features >Optional Features 2 > GPS/Bluetooth > Bluetooth > Portable)0 Configuring Bluetooth Headset Connection Type (RF Deck/Control Head 1) ( Transceiver Settings > OptionalFeatures > Optional Features 2 > GPS/Bluetooth > Bluetooth > RF Deck/Control Head 1)Resetting the Connection by Headset ProfileConnection by Headset Profile can be reset by one of the following methods:0 Pressing the Bluetooth Connect / Disconnect key when a connected Bluetooth-compatible device exists0 Placing the transceiver in Bluetooth My Devices Mode, selecting a connected Bluetooth-compatible device, and pressingthe Menu ([Q]) or [*] key (Refer to Displaying a Bluetooth-compatible Device (Bluetooth My Devices).)0 Disabling Bluetooth0 Moving outside the Bluetooth operation range0 Receiving a disconnection request from a connected Bluetooth-compatible deviceIf connection by Headset Profile is reset by any of these methods, a Bluetooth Disconnect Tone (2 beeps) sounds from thetransceiver, the “V” icon blinks, and “Disconnected” appears on the display for 1 sec.Menu Zone +Zone 1Channel 112 : 34 AMDisconnectedAlso, connection by Headset Profile can be reset even by the following methods:0 Turning the transceiver OFF0 Disabling Bluetooth (Refer to Toggling Bluetooth On/ Off.)10 BLUETOOTH COMMUNICATION10.5 About Headset Profile (HSP Connection/ HSP Disconnection)Common FUNC (K, F)/Ver 2.20 200CONTENTS INDEX
