Note0 The firmware is written to KRK-14H and KCH-20R at the factory. If the firmware of the Control Head and the firmware ofthe RF Deck do not match, “FIRM MISMATCH” appears.0 Because the firmware needs to be written to each panel to make a system in a Dual Control Head structure, update thefirmware by using both Control Heads.0 Once the initial configuration is done, if a system is made in a Multi RF Deck/ Multi Control Head structure, the firmwarecan be written to multiple RF Decks simultaneously.0 KCT-71 has parts of the following 3 lengths:KCT-71M2: 17 feet (5.2 m)KCT-71M3: 25 feet (7.6 m)KCT-71M4: 1.6 feet (0.5 m)Activating a Radio Feature License (KWD-5004MR)To use the Multi RF Deck/ Multi Control Head function, a Radio Feature License (KWD-5004MR) for a Multi RF Deck needsto be activated for the transceiver by using KPT-300LMC. In the same manner as the writing of the firmware, activate theRadio Feature License for each RF Deck. The following is the operation procedure to use 3 RF Decks:1 Make the system in a Single RF Deck/ Single Control Head structure.2 Activate the Radio Feature License (KWD-5004MR) for each RF Deck with the Control Heads and RF Decksconnected.KCT- 71KKPT-T-300LMCKWD-5004MR(Multi RF Deck)RF Deck(N X-5*00)KRK-15BRF Deck(N X-5*00)KRK-15BRF Deck(N X-5*00)KRK-15BKRK-14H KRK-14HBasic Panel(KCH-19) Basic Panel(KCH-19)FeaturedPanel(KCH-20R)KRK-15BDip SWKRK-14H or KCH-20RDip SWFigure 16-5 Activation of the Radio Feature License (KWD-5004MR)NoteKWD-5004MR (Multi RF Deck) is activated before the factory shipment. No charge is incurred for activation.16 MULTI RF DECK/ MULTI CONTROL HEAD16.4 Configuring the Initial ConfigurationCommon FUNC (K, F)/Ver 2.20 251CONTENTS INDEX
