1.2 NX-5700/ NX-5800/ NX-5900KCH-19 (Basic Panel)1 2 38 9 10 1311 125467Figure 1-2 NX-5700/ NX-5800/ NX-5900 Front View (KCH-19 (Basic Panel))A [P] (Power) SwitchThe transceiver is turned ON when this switch is pressedand the transceiver is turned OFF when this switch ispressed again. In this manual, the [P] (Power) switch isdescribed as the Power switch.B [+]/ [-] KeyThe preassigned function will be activated or will bechanged to the active state. It is normally used for thevolume adjustment of the speaker.C LCDThe channel number and the transceiver’s status appearon this display.D [G]/ [H] KeyThe preassigned function will be activated or will bechanged to the active state. It is normally used to changethe zone or channel.E SpeakerThe received audio and the Alert Tone sound from thespeaker.F Transmit LED/ Busy LEDThese LEDs light when the transceiver transmits orreceives a signal.G Illumination SensorThe sensor is for automatically adjusting the luminanceof the LCD depending on the brightness of theenvironment.H [T] (Home) KeyThe preassigned function will be activated or will bechanged to the active state. In this manual, the [T](Home) key is described as the Home ([T]) key.I [Q] (Menu) KeyThe preassigned function will be activated or will bechanged to the active state. In this manual, the [Q](Menu) key is described as the Menu ([Q]) key.The default of the [Q] (Menu) key is the Menu function.If the configuration is changed using KPG-D1/ D1N, anewly configured function will be activated. Unless theMenu function is reassigned to the [Q] (Menu) key, MenuMode cannot be activated even if the [Q] (Menu) key ispressed.J [O] (Back) KeyThe preassigned function will be activated or will bechanged to the active state. In this manual, the [O](Back) key is described as the Back ([O]) key.K [E]/ [F] KeyThe preassigned function will be activated or will bechanged to the active state. It is normally used to changethe zone or channel.L [W] (Function) KeyThe preassigned function will be activated or will bechanged to the active state. In this manual, the [W](Function) key is described as the Function ([W]) key.M AUX KeyThe preassigned function will be activated or will bechanged to the active state.1 FUNCTIONS AND PANEL LAYOUT1.2 NX-5700/ NX-5800/ NX-5900Common FUNC (K, F)/Ver 2.20 3CONTENTS INDEX
