3.1 Turning the Transceiver ON/ OFFTurning the Transceiver ONFor Portable, rotating the Power switch clockwise causes the transceiver to be turned ON.For Mobile, pressing the Power switch causes the transceiver to be turned ON. Also, the transceiver can be turned ON bylinking to the status of the Ignition Sense port of a vehicle. (Refer to Turning the Transceiver ON or OFF According to theState of the Ignition Sense Port (Ignition Sense).)0 If the data is written to the transceiver and the password is not configured1 Turn the Transceiver ON.A Power-on Tone A (1 beep) sounds from the transceiver, and then ananimated logo appears for 500 ms.If Custom Start-up Screen is configured, a Power-on Tone A (1 beep)sounds from the transceiver when the transceiver is turned ON and thebitmapped image configured for the transceiver appears for 2 sec. (Referto Displaying a Bitmap Image When the Transceiver is Turned ON (CustomStart-up Screen).)If Power-on Text is configured, the Power-on Text appears for 2 sec after“SELF TESTING” appears. (Refer to Power-on Text.)The transceiver enters User Mode, and then the channel name appears.NoteThe animated logo appears only if Custom-Start-up Screen is notconfigured.Zone +Zone 1Truck 864912 : 34 AMMenu Zone +Zone 1Channel 112 : 34 AM3 BASIC OPERATIONS3 BASIC OPERATIONSCommon FUNC (K, F)/Ver 2.20 26CONTENTS INDEX
