16.15 Communications in an Emergency (Emergency)Emergency is the function to notify the base station or people around of the emergency situation by sending radio signalsor emitting an alarm when a user is placed in the emergency state.In a Multi RF Deck system, one of the multiple RF Decks executes the Emergency behavior in Emergency Mode, and theother RF Decks do not transmit and receive. The RF Decks enter Emergency Mode as a single system structured with MultiRF Deck/ Multi Control Head.A Zone-channel on which the Emergency behavior is activated can be configured by using the configuration in EmergencyChannel Type (Selected, Fixed).0 SelectedThe transceiver resets the current channel moving status (such as Home Channel) and starts the Emergency behavioron the Zone-channel last selected by the Selected RF Deck.0 FixedIf the transceiver enters Emergency Mode, the transceiver migrates to the Zone-channel of the RF Deck configured inEmergency Zone-Channel and starts the Emergency behavior.The Emergency key can be configured for each Control Head. Also, Emergency in AUX Input can be configured only forone RF Deck or Control Head of all RF Decks and Control Heads.RF Deck 1(Selected RFDeck)RF Deck 2(UnselectedRF Deck)Control Head1Control Head2ONEMG RF Deck 1(Selected RFDeck)RF Deck 2(UnselectedRF Deck)Control Head1Emergency ModeControl Head2Figure 16-65 Emergency16 MULTI RF DECK/ MULTI CONTROL HEAD16.15 Communications in an Emergency (Emergency)Common FUNC (K, F)/Ver 2.20 302CONTENTS INDEX
