Function Name DescriptionAvailableCommunicationSystems*1VOX FunctionPressing and holding the VOX key toggles VOX between enabled anddisabled.NoteVOX Function can be configured only in Hold for the VOX key, and theconfiguration cannot be changed.SeeVOXAnalog ConventionalNXDN ConventionalP25 ConventionalDMR ConventionalZeroizeDeletes all Encryption Key data stored in the SCM.See0 P25 FUNC Deleting all Encryption Keys (Zeroize)0 NXDN FUNC Deleting All Encryption Keys (Zeroize)P25 ConventionalP25 TrunkingNXDN ConventionalNXDN TrunkingZone Delete/Add The selected zone is added to or excluded from the target for scan. ALLZone Down Decreases the zone number in steps of 1. ALLZone Down(Continuous)Pressing and holding the Zone Down key will decrease the zone number insteps of 1 every 200 ms.NoteZone Down (Continuous) can be configured only in Hold for the Zone Downkey, and the configuration cannot be changed.ALLZone Up Increases the zone number in steps of 1. ALLZone Up(Continuous)Pressing and holding the Zone Up key will increase the zone number in stepsof 1 every 200 ms.NoteZone Up (Continuous) can be configured only in Hold for the Zone Up key,and the configuration cannot be changed.ALL*1 ALL indicates that a function can be used in all the following communication systems:0 Analog Conventional0 P25 Conventional0 P25 Trunking0 NXDN Conventional0 NXDN Trunking0 DMR Conventional0 LTR TrunkingNote0 The transceiver migrates to the function’s own mode by pressing a key to which the following functions are assigned.This mode is referred to as “Function Mode”.Table 19-2 Function ModeKey Function Function Mode2-tone 2-tone ModeAutodial Autodial ModeAutodial Programming Autodial Programming ModeChannel Entry Channel Entry ModeClock Adjustment Clock Adjustment ModeEject SD Card Eject SD Card ModeFormat SD Card Format SD Card ModeGPS Position Display GPS Position Display Mode19 CONFIGURATION FOR EACH FUNCTION19.1 Available Functions for the PF KeysCommon FUNC (K, F)/Ver 2.20 409CONTENTS INDEX
