3.4 Using Menu ModeMenu Mode allows a selecting a function in the menu format and activating the function.Since a maximum of 64 functions can be configured for a maximum of 12 categories, many functions can be used in MenuMode.Operating the transceiverThe following procedure is an example of the user operation in Menu Mode. Displays and operation methods vary dependingon the configuration in Menu Icon Size.0 If “Large” is configured in Menu Icon Size1 Press the Menu key.The transceiver enters Menu Mode and then category icons appear.2 Select a category by pressing the [ ], [ ], [ ], or [ ] key.Note0 If other function icons are in the rows below and the [F] key is pressedwhile the focus is at the right end of the current row, the function iconsin the row directly below appear and the focus moves to the left end ofthis row directly below. If other function icons are not in the rows belowand the [F] key is pressed while the focus is at the right end of the currentrow, a Rollover Tone (1 beep) sounds from the transceiver, and then thefocus moves to the left end of the current row.0 If other function icons are in the rows above and the [E] key is pressedwhile the focus is at the left end of the current row, the function icons inthe row directly above appear and the focus moves to the left end of thisrow directly above. If other function icons are not in the rows above andthe [E] key is pressed while the focus is at the left end of the current row,a Rollover Tone (1 beep) sounds from the transceiver, and then the focusmoves to the right end of the current row.3 Press the Menu ([ ]) or [ ] key.The Function List for the selected category appears.12 : 34 AMAudio 1Next12 : 34 AMMessage 5NextNext12 : 34 AMIndividualGroupStatusBackCall 13 BASIC OPERATIONS3.4 Using Menu ModeCommon FUNC (K, F)/Ver 2.20 37CONTENTS INDEX