Configuring the Display Order of Data in Stack Mode (Stack Order)Stack Order is the display order of data in Stack Mode.Depending on the configuration of Stack Order, the data is displayed in Stack Mode as follows:Table 3-8 Stack OrderConfiguration DescriptionDescending The newest data appears on the first line of the list.Ascending The oldest data appears on the first line of the list.Configuration using KPG-D1/ D1NConfiguring Stack Order ( Transceiver Settings > Optional Features > Optional Features 1 > Stack)Enabling the Storage of Redundant Data (Repeated Calls Stack)Repeated Calls Stack is the function to enable the storage of redundant data.If Repeated Calls Stack is enabled, a Caller ID or message is stored as new data in the stack memory of the transceivereven if the same Caller ID or message has been previously received.Configuration using KPG-D1/ D1NConfiguring Repeated Calls Stack to be enabled or disabled ( Transceiver Settings > Optional Features > OptionalFeatures 1 > Stack)Displaying the Caller ID when Displaying a Message (Caller ID for Message)Caller ID for Message is the function to display the Caller ID of the stored data when the Status Message or Short Messageis displayed in Stack Mode.Configuration using KPG-D1/ D1NConfiguring Caller ID for Message to be enabled or disabled ( Transceiver Settings > Optional Features > OptionalFeatures 1 > Stack > Message Display)3 BASIC OPERATIONS3.7 Viewing the Receive History (Stack)Common FUNC (K, F)/Ver 2.20 54CONTENTS INDEX
