Function DescriptionQueue ToneThis tone sounds from the transceiver while the transceiver is searching with the Auto Telephonein an LTR Trunking system for an available RIC repeater to be connected. This tone sounds fromthe transceiver every 1 sec until an available RIC repeater to be connected is found or AutoTelephone is terminated if the transceiver cannot find an available RIC repeater within 60 sec.Free System RingbackMode ToneThis tone sounds from the transceiver when the transceiver enters Free System Ringback Modein an LTR Trunking system.Ringer Tone This tone sounds from the transceiver when a repeater is temporarily available in Free SystemRingback Mode in an LTR Trunking system.Priority-channel Tone This tone sounds from the transceiver when the scan is paused on a Priority-channel.Scan Stop TonePressing the Home Channel or Direct Channel key during the scan pauses the scan, and thetransceiver migrates to the Home Channel or Direct Channel. Also, pressing the ChannelRecall key during the scan pauses the scan, and the transceiver migrates to the last called Zone-channel. This tone sounds from the transceiver at 30-sec intervals while the scan pauses.Individual Call Mode This tone sounds from the transceiver when the transceiver initiates a FleetSync Individual Call.Fleet Call Tone This tone sounds from the transceiver when the transceiver initiates a FleetSync Fleet Call.Group Call Tone This tone sounds from the transceiver when the transceiver initiates a FleetSync Group Call.Search Mode ToneThis tone sounds from the transceiver when the transceiver initiates Forced Search in an NXDNTrunking system.This tone sounds from the transceiver when the transceiver initiates System Search in a P25Trunking system.This tone sounds from the transceiver when the transceiver starts searching for the repeaters thatcan be synchronized in a DMR Conventional system.Out of Range ToneThis tone sounds at 30-sec intervals from the transceiver when the transceiver is in the searchstate, even if 10 sec elapse after the transceiver starts searching for a control channel in an NXDNTrunking system or P25 Trunking system.Call Request ToneNXDN Trunking/ P25 Trunking system:This tone sounds from the transceiver when the transceiver initiates an Individual Call or GroupCall by pressing the PTT switch.NXDN Conventional system:This tone sounds from the transceiver when the transceiver initiates an Individual Call (IndividualCall Acknowledge Request) by pressing the PTT switch.OTAP ReactivationTone This tone sounds from the transceiver when OTAP Reactivation completes.Call In Progress ToneThis tone sounds from the transceiver if the transceiver initiates a Telephone Call, Individual Call(Message Trunked (Enhanced)), or Group Call (Message Trunked (Enhanced)) and thetransceiver is available for communications.Disconnect IndicationToneThis tone sounds from the transceiver if the transceiver terminates communications with aTelephone Call, Individual Call (Message Trunked (Enhanced)), or Group Call (Message Trunked(Enhanced)).Key Load Alert Tone This tone sounds from the transceiver when Key Data is written to the Secure CryptographicModule (SCM) or when Key Data is deleted is from the SCM.Transaction ConfirmedToneIn a DMR Conventional system, this tone sounds from the transceiver when the transceiver detectsthat no carrier is present after sending a Call Interrupt request message.Bluetooth Find DeviceMode ToneThis tone sounds from the transceiver when Bluetooth Find Device is executed in Bluetooth DeviceMode and a Bluetooth-compatible device is searched.Bluetooth ConnectToneThis tone sounds from the transceiver when the transceiver successfully connects to a Bluetooth-compatible device.Bluetooth DisconnectToneThis tone sounds from the transceiver when the connection to a Bluetooth-compatible device isdisconnected.Complete Tone This tone sounds from the transceiver when the transmission successfully sends a StatusMessage, Short Message, GPS data or Paging Call by operating the keys on the transceiver.Record Stopped Tone This tone sounds from the transceiver when the transceiver exits Voice Memo Mode.6 SOUND6.1 Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is ChangedCommon FUNC (K, F)/Ver 2.20 108CONTENTS INDEX
