17.12 About the Message DisplayWhile building a Multi RF Deck/ Multi Control Head system, the messages that appear in the FPU are as follows:Table 17-1 Message DisplayMessage Description“Do you wish to save the changeddata?” (Yes/ No/ Cancel)This message is displayed if Multi RF Deck Setup is opened while editing theconfiguration data of Multi RF Deck in a screen of KPG-D1/ D1N.Click the “Yes” button to store the configuration data. If the “No” button is clicked, theconfiguration data is not stored.“The Multi RF Deck commonfunctions of the RF Deck Dataconfigured in Master OperationData will be applied to other RFDeck Data.” (OK/ Cancel)Clicking the “Write” button in Multi RF Deck Setup displays this message.Clicking the “OK” button expands the common configuration in the configuration dataconfigured in Master Operation Data to the data of other RF Decks. Because theconfiguration data cannot be written in Multi RF Deck unless the commonconfiguration is expanded to all RF Decks, clicking the “OK” button is required.“If you start “Write Data to thetransceiver”, P25 Encryption Keydata will be cleared.” (OK/ Cancel)If Zeroize is enabled in Write Data to the Transceiver, clicking the “Write” buttondisplays this message.Clicking the “OK” button starts the writing of the configuration data.“The system structure of the data tobe written differs from the systemstructure of the Multi RF Deck orControl Head. For this reason,some functions do not work. Do youwish to continue?” (OK/ Cancel)When attempting to write configuration data to the transceiver not connected toControl Head 1, or when attempting to write the data configured in Control Head 2(Product Information > Control Head Configuration) to the transceiver notconnected to Control Head 2, this message appears.“Do you wish to save the writtendata?” (Yes/ No/ Cancel)After writing configuration data in an RF Deck, this message appears.The configuration contents of configuration data are automatically changed for eachRF Deck by the common configuration in the configuration data configured in MasterOperation Data being expanded to the configuration data of each RF Deck.Therefore, this message appears.Click the “Yes” button to store the configuration data. If the “No” button is clicked, theconfiguration data is not stored.NoteRefer to the service manual for the content of messages that appear on the transceiver display and how to manage whena message appears.17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD17.12 About the Message DisplayCommon FUNC (K, F)/Ver 2.20 386CONTENTS INDEX
