Warning ToneWarning Tone is a tone that sounds from the transceiver before or when the transceiver is disabled to transmit, when thetransceiver becomes unable to transmit, or when the transceiver attempts to transmit while the transceiver is unable totransmit.The volume level of Warning Tone can be configured using KPG-D1/ D1N. (Refer to Configuring the Volume Level of VariousTones (Tone Volume).)Table 6-4 Warning ToneFunction DescriptionWarning Tone AThis tone sounds from the transceiver while an unprogrammed channel is selected.This tone sounds from the transceiver until the PTT switch is released if the transmission isterminated by the Time-out Timer, or if the transceiver cannot transmit.This tone sounds from the transceiver until the PTT switch is released if Busy ChannelLockout is activated in an Analog Conventional, P25 Conventional and NXDN Conventionalsystem.Warning Tone B This tone sounds from the transceiver when the VOX transmission is terminated by Time-out Timer.Warning Tone C This tone sounds from the transceiver when the automatic transmission is terminated byTime-out Timer.Battery Warning Tone(Portable only)This tone sounds from the transceiver when the Battery voltage level drops to the adjustedreduced-voltage level. (Refer to Warning that the Battery Voltage Is Low (BatteryWarning).)TOT Pre-alert Tone This tone sounds from the transceiver when the transmit inhibit period configured in Time-out Timer is about to expire.PLL Unlock Tone This tone sounds from the transceiver when PLL is unlocked.Busy Tone This tone sounds from the transceiver if data cannot be sent by pressing the PTT switchsince the channel is busy.Busy Tone 2This tone sounds from the transceiver if data communication is disabled since the channelis busy.This tone sounds from the transceiver when the transceiver receives a response messagefrom the system that notifies of the busy state of the receiving transceiver in an NXDNTrunking system.Timed Power-off Pre-alertTone A (Mobile only)This tone sounds from the transceiver 1 min before the time preconfigured in Timed Power-off.Timed Power-off Pre-alertTone B (Mobile only)This tone sounds from the transceiver 10 sec before the time preconfigured in TimedPower-off.Timed Power-off Pre-alertTone C (Mobile only)This tone sounds from the transceiver 2 sec before the time preconfigured in Timed Power-off.Call Queue ToneThis tone sounds from the transceiver when the transceiver receives a response messagefrom the system that indicates a queued state in an NXDN Trunking system or P25 Trunkingsystem.System Busy Tone This tone sounds from the transceiver when the transceiver receives a response messagefrom the system indicating that no traffic channel is available in an NXDN Trunking system.System Search Tone This tone sounds from the transceiver when the transceiver initiates System Search andchanges the system in an LTR Trunking system.System Search End Tone This tone sounds from the transceiver when there is no repeater that can connect by usingSystem Search in an LTR Trunking system.System Select ToneThis tone sounds from the transceiver when the transceiver finds an available system byusing System Auto Select and registration is successful in an NXDN Trunking system.This tone sounds from the transceiver when the transceiver searches for the repeaters that canbe synchronized and a synchronized Personality is found in a DMR Conventional system.Call Invalid ToneThis tone sounds from the transceiver when the transceiver receives from the system aresponse message, such as a response message that service is disabled, in an NXDNTrunking system or P25 Trunking system.Invalid Dial ToneWhile sending a Telephone Call in a P25 Trunking system, this tone sounds from thetransceiver when the transceiver receives from the system a response message that serviceis disabled (Reason Code: $40 or $42).6 SOUND6.1 Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is ChangedCommon FUNC (K, F)/Ver 2.20 109CONTENTS INDEX
