Note0 When Public Address is enabled, the PTT switch can be operated on both Control Heads, but the PTT switch pressedearlier becomes enabled. At this time, while the PTT switch of one Control Head is being pressed, nothing behaves evenif the PTT switch of the other Control Head is pressed.0 The volume of an external speaker while Public Address is functioning varies in conjunction with the volume of theControl Head configured in Master Volume Control.0 When an external speaker (KES-3 or KES-5) is not connected to RF Deck 1, the audio of Public Address is emitted fromControl Heads. If the external speaker is disconnected from RF Deck 1 while Public Address is enabled, the output isswitched to the output of the Control Heads.Configuring the Output Method of the Received Audio and Beep (Multi RF DeckAudio Output Type)Multi RF Deck Audio Output Type is the function that switches the output method of the received audio and beep in aMulti RF Deck/ Multi Control Head structure to “Single Audio Output” or “Multi Audio Output”.The transceiver behaves as follows according to the configuration in Multi RF Deck Audio Output Type:Table 16-10 Multi RF Deck Audio Output TypeConfiguration DescriptionSingle Audio OutputThe transceiver emits the received audio and beep of each RF Deck from the speaker of theControl Head, from the external speaker connected to RF Deck 1, or from both according to theconfiguration in External Speaker. The received audio and beep does not sound from each RFDeck at the same time. Only the received audio and beep of a single RF Deck sounds accordingto the output priority level.Because the audio of each RF Deck can be heard without preparing multiple external speakers,this configuration is used for the operation of Multi RF Deck/ Multi Control Head within a limitedspace.NoteOutput priority level is in the order: RF Deck 1, RF Deck 2, RF Deck 3 (highest to lowest).Multi Audio OutputThe received audio and beep of the Selected RF Deck sounds from the speaker of the ControlHead according to the configuration in External Speaker. Also, because the received audio andbeep of each RF Deck sounds from the external speaker connected to each RF Deck, the receivedaudio and beep of multiple RF Decks can be heard at the same time.Because the received audio and beep of each RF Deck can be heard at the same time from theexternal speaker connected to the Control Head and each RF Deck, this configuration is used tomonitor without missing the received audio and beep of all RF Decks.16 MULTI RF DECK/ MULTI CONTROL HEAD16.7 Audio FunctionCommon FUNC (K, F)/Ver 2.20 288CONTENTS INDEX