7.7 Checking the Detailed Information of a Battery (BatteryInformation Display)Supported Models: PortableBattery Information Display is the function for checking the detailed information of an Intelligent Battery. The informationof an Intelligent Battery, such as the battery consumption level and the performance temperature, can be checked.By pressing the Menu key to enter Menu Mode, and then executing “Battery Information Display”, Battery Information DisplayMode is entered. (Refer to Using Menu Mode.)In Battery Information Display Mode, the following battery information is displayed:Table 7-6 Battery Information Display ModeItem Appearanceof the Display Display Range DescriptionCurrent Charge Charge 0 % to 100 % Indicates the charge status of an Intelligent Battery.Cycle Count Count 0 to 65535 Indicates the number of charges and discharges of an IntelligentBattery.Battery Health Health 0 % to 100 % Indicates the degradation status of an Intelligent Battery.Current Voltage Voltage 0 V to 12.00 V Indicates the voltage value of an Intelligent Battery.Temperature Temp.Celsius:-60.0 ºC to 100.0 ºCFahrenheit:-76.0 ºF to 212.0 ºFIndicates the temperature of an Intelligent Battery.Chemistry Chem. Li-ion, Ni-MH Indicates the type of an Intelligent Battery.Serial Number Serial 10-digitalphanumericcharacter Indicates the serial number of an Intelligent Battery.Model Name Model KNB-L1, KNB-L2,KNB-L3, KNB-N4 Indicates the model name of an Intelligent Battery.Date of First Use 1st Used Year/ Month/ DayIndicates the date of first use of an Intelligent Battery. The order ofthe year, month and day depends on the configuration of DateFormat.* If the values are not entered on the Battery Reader such asKAS-12, “--/--/--” is displayed.Battery Alias Alias 20 alphanumericcharacters andsymbolsIndicates the arbitrary string of text entered on the Battery Readersuch as KAS-12.* Only ASCII codes 0x20 - 0x7E are enabled. A character codeother than these ASCII codes will be replaced with one or morespaces.Pressing the [H] key can change the display in the following order:Charge, Count, Health Display N Voltage, Temp., Chem. Display N Serial, Model, 1st Used Display N Alias Display NCharge, Count, Health Display N ...Pressing the [G] key can change the display in the following order:Charge, Count, Health Display N Alias Display N Serial, Model, 1st Used Display N Voltage, Temp., Chem. Display NCharge, Count, Health Display N ...Note0 “---” remains on the display if the information of an Intelligent Battery cannot be acquired such as when the transceiveris turned ON while the transceiver is connected to the battery charger or when the battery other than an Intelligent Batteryis used.0 Battery Information is not updated while the transceiver is in Battery Information Display Mode.0 Since KNB-N4 does not support Battery Alias and Date of First Use, “---” remains for these items even if reading iscompleted properly.7 BATTERY7.7 Checking the Detailed Information of a Battery (Battery Information Display)Common FUNC (K, F)/Ver 2.20 149CONTENTS INDEX
