15.4 Changing the Configuration of the Transceiver (Front PanelProgramming Mode)This mode can be used to change data, such as the frequency on a Conventional Channel, and to add a ConventionalChannel in the transceiver only.Even if no KPG-D1/ D1N and PC is available, required data can be configured by using only the transceiver.Pressing the Front Panel Programming key places the transceiver in Front Panel Programming Mode. Or, pressing theMenu key places the transceiver in Menu Mode, and the transceiver can be placed in Front Panel Programming Mode byselecting “Panel Program”. (Refer to Using Menu Mode.)NoteTo use this mode, a Radio Feature License (KWD-5001FP) is required.Operating the transceiver1 Press the Front Panel Programming key.If Clone/Front Panel Programming Password is not configured:The transceiver enters Front Panel Programming Mode.If Clone/Front Panel Programming Password is configured:The password entry display appears.Press the Menu ([Q]) or [*] key after entering a password.Refer to “Entering or Deleting a Code” for entry methods.If the correct password is entered, the transceiver enters Front PanelProgramming Mode.2 Press the Menu ([ ]) or [ ] key.The zone selection display appears.12 : 34 AMPanel ProgramNext12 : 34 AMInput PasswordPanel Program12 : 34 AMPanel ProgramNextZone 712 : 34 AMZone 2Zone 6NextZone Select 215 MODE15.4 Changing the Configuration of the Transceiver (Front Panel Programming Mode)Common FUNC (K, F)/Ver 2.20 243CONTENTS INDEX
