Operating the transceiver1 Press the GPS Position Display key.The transceiver enters GPS Position Display Mode.The following operations are identical even if the transceiver enters GPS Position Display Mode by pressing theMenu key.The following displays appear:0 Latitude and Longitude Display12 : 34 AMGPS Pos DispNorth 35 º 33.12 ”East 135 º 33.32 ”Altitude 1000mBackExit“Degrees, Minutes” display “Degrees, Minutes, Seconds” display12 : 34 AMGPS Pos DispNorth 35 º 33.206 ´East 139 º 33.546 ´Altitude 1000mBackExit0 Altitude DisplayMeters display“Altitude” is displayed in meters. “Altitude” is displayed in feet.Feet display12 : 34 AMGPS Pos DispNorth 35 º 33.206 ´East 139 º 33.546 ´Altitude 3048ftBackExit12 : 34 AMGPS Pos DispNorth 35 º 33.206 ´East 139 º 33.546 ´Altitude 1000mBackExit0 GPS Non-positioning Status Display12 : 34GPS Pos DispNorth 35 º 33.206 ´East 139 º 33.546 ´Altitude 1000mBackExit12 : 34 AMGPS Pos DispNorth -- º -- . --- ´East --- º -- . --- ´Altitude ------ mBackExitThe “” icon blinks if 5 sec elapse after the transceiverreceives non-positioning data from the GPS receiverunit and is not able to receive serial data.“-” appears for all digits on the display if the transceiverreceives no location data from the GPS receiver unit,such as immediately after the transceiver is turned ON.NoteFor Mobile, the transceiver automatically toggles between displaying the location (latitude and longitude) and thealtitude approximately every 5 sec.2 Press the Menu ([ ]) or [ ] key.The transceiver exits GPS Position Display Mode and then restores the previous display.Note“-” appears for all digits on the display if the transceiver is not receiving any location data from the GPS receiver unit, suchas when the transceiver is turned ON.8 GPS POSITION DISPLAY8.2 Displaying the Location InformationCommon FUNC (K, F)/Ver 2.20 152CONTENTS INDEX
