1.1 NX-5200/ NX-5300/ NX-5400123678101317 18111214 151654919 Full Key Model Standard Key Model123678101317 18111214 151654209Figure 1-1 NX-5200/ NX-5300/ NX-5400 Front ViewA SelectorThe preassigned function will be activated or will bechanged to the active state. It is normally used to changethe zone or channel.B Power Switch/ Volume ControlThe transceiver can be turned ON by rotating the Powerswitch. The volume level of the speaker sound can beadjusted.C Transmit LED/ Busy LEDThese LEDs light when the transceiver transmits orreceives a signal.D AUX KeyThe preassigned function will be activated or will bechanged to the active state.E Lever SwitchThe preassigned function will be activated or will bechanged to the active state.F Side 1 KeyThe preassigned function will be activated or will bechanged to the active state.G SpeakerThe received audio and the Alert Tone sound from thespeaker.H PTT SwitchPressing the PTT switch allows transmitting.I Built-in MicrophoneJ LCDThe channel number and the transceiver’s status appearon this display.K Side 2 KeyThe preassigned function will be activated or will bechanged to the active state.L Side 3 KeyThe preassigned function will be activated or will bechanged to the active state.M [G]/ [H] KeyThe preassigned function will be activated or will bechanged to the active state. It is normally used to changethe zone or channel.N [Q] (Menu) KeyThe preassigned function will be activated or will bechanged to the active state. In this manual, the [Q](Menu) key is described as the Menu ([Q]) key.1 FUNCTIONS AND PANEL LAYOUT1 FUNCTIONS AND PANEL LAYOUTCommon FUNC (K, F)/Ver 2.20 1CONTENTS INDEX
