17.9 Changing the Display Positions of a Channel Name and anIcon When Multi RF Deck View Is OnIf Multi RF Deck View is enabled when KCH-20R (Featured Panel) or KCH-21R (Handheld Control Head) is used for aControl Head, the channel names of all RF Decks in the Multi RF Deck system can be displayed simultaneously on thedisplay.By changing the configuration of the DIP switch of an RF Deck, the display positions of a channel name and an icon in MultiRF Deck View can be changed.Head BControlCRF DeckKRK-15BBRF DeckKRK-15BHead AControlARF DeckKRK-15BControlHead BCRF DeckKRK-15BBRF DeckKRK-15BHead AControlARF DeckKRK-15BRF Deck 1 RF Deck 2 RF Deck 3 RF Deck 1 RF Deck 2 RF Deck 3Before DIP Switch Change After DIP Switch ChangeDisplay Position of RF Deck No. 1:Display Position of RF Deck No. 2:Display Position of RF Deck No. 3:Figure 17-69 Changing the Display Position of a Channel Name in Multi RF Deck ViewThis section describes the procedure to switch an RF Deck number in a system of a Triple RF Deck/ Dual Control Headstructure.NoteIf switching an RF Deck number in a Multi RF Deck system, writing the configuration data is not required.17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD17.9 Changing the Display Positions of a Channel Name and an Icon When Multi RF Deck View Is OnCommon FUNC (K, F)/Ver 2.20 375CONTENTS INDEX
