Using Sound to Notify the Other Party that the Communication Ends (PTT ReleaseTone)PTT Release Tone is the function to notify the receiving party by audible tone that a communication ended by releasing thePTT switch when the communication ends. With this function, knowing an audible tone marks the end of a call will allow thereceiving party to easily recognize the timing to transmit next.The transceiver transmits the PTT Release Tone (1 beep) and then ends the actual transmission when the call finishes byreleasing the PTT switch.PTT OffPTT Release TonePTT OnTransmitReceiveFigure 6-1 PTT Release ToneThe volume level of PTT Release Tone can be configured in Transmit Tone Level.Configuration of PTT Release Tone in an LTR Trunking systemIn an LTR Trunking system, the enabling and disabling of PTT Release Tone when transmitting a Dispatch ID and theenabling and disabling of PTT Release Tone when transmitting a Telephone ID can each be configured. This can beconfigured individually in order to avoid double beeping when using a Telephone ID, since some repeaters have a functionsimilar to Telephone ID.NoteIf EOT for DTMF or MDC-1200 is configured, the PTT Release Tone is sent after the EOT is sent. If EOT for FleetSyncis configured, a PTT Release Tone is sent after the EOT is sent.Configuration using KPG-D1/ D1N0 Configuring PTT Release Tone (NXDN Trunking) to be enabled or disabled ( Transceiver Settings > Personal >Personal Features > NXDN Trunking > General)0 Configuring PTT Release Tone (P25 Trunking) (Personality) to be enabled or disabled ( Transceiver Settings >Personal > Personality > P25 Trunking)0 Configuring PTT Release Tone (P25 Trunking) (Channel Table) to be enabled or disabled ( Transceiver Settings> Zone/Channel > Channel Edit > P25 Trunking)0 Configuring PTT Release Tone (Conventional) to be enabled or disabled ( Transceiver Settings > OptionalFeatures > Optional Features 2 > Conventional)0 Configuring PTT Release Tone (LTR Trunking) to be enabled or disabled ( Transceiver Settings > LTR)0 Configuring Transmit Tone Level ( Transceiver Settings > Optional Features > Optional Features 1 > Sound)6 SOUND6.3 Tones that Sound When the Communication Starts/ EndsCommon FUNC (K, F)/Ver 2.20 119CONTENTS INDEX
