3 Press the Menu ([ ]) key.The transceiver exits Group ID Entry Mode and then migrates to the channel of the entered Group ID.If there is no channel with the entered Group ID, a Key-entry Error Tone (1 beep) sounds from the transceiver, andthen the transceiver exits Group ID Entry Mode.Note0 Refer to “KEY OPERATIONS FOR EACH MODE” for key operations for entering the Group ID in Group ID Entry Mode.0 Pressing the PTT switch while in Group ID Entry Mode causes the transceiver to transmit on the channel selected beforethe transceiver entered Group ID Entry Mode. If the channel is changed while in Group ID Entry Mode, pressing the PTTswitch initiates transmission on the channel to which the transceiver has changed.Configuration using KPG-D1/ D1NAssigning functions to the PF keys on the transceiver ( Transceiver Settings > Key Assignment)Changing the Channel with a Single TouchThe channel can be changed with a single touch by using the Home Channel or Direct Channel function.Home ChannelHome Channel is the function to migrate the transceiver to a preconfigured channel by pressing the Home Channel key.The transceiver can move to and from channels in the same zone.Also, pressing the Home Channel Select key can change the Home Channel.Or, pressing the Menu key causes the transceiver to enter Menu Mode, and then the Home Channel can be changed byselecting “Home Channel Select”. (Refer to Using Menu Mode.)NoteIf the Home Channel key is pressed during the scan, the transceiver pauses scanning while the transceiver is migratingto the Home Channel, and then a Scan Stop Tone (2 beeps) continuously sounds from the transceiver at 30-sec intervals.Operating the transceiver0 Migrating to the Home Channel1 Press the Home Channel key.A Key Beep A (1 beep) sounds from the transceiver, and then thetransceiver migrates to the Home Channel configured for the selectedzone. “Home” appears on the display.Menu Zone +HomeZone 1Channel 112 : 34 AM3 BASIC OPERATIONS3.5 Changing the Zone-channelCommon FUNC (K, F)/Ver 2.20 45CONTENTS INDEX
