Supported Models: MobileBy connecting 1 or 2 Control Heads to multiple mobile transceivers (RF Decks), 1 Multi RF Deck system can be structured.Figure 16-1 Multi RF Deck/Multi Control Head“RF Deck” indicates NX-5700/ NX-5800/ NX-5900, and “Control Head” indicates Basic Panel (KCH-19), Featured Panel(KCH-20R), and Handheld Control Head (KCH-21R).This chapter describes the basic operations when structuring Multi RF Deck/ Multi Control Head and the behavior of eachfunction.16.1 DescriptionIn Multi RF Deck/ Multi Control Head, the following functions can be achieved:0 Transceivers can be operated with a combination of different frequencies such as VHF/ UHF/ 700-800 MHz.0 Transceivers can be operated with a combination of different protocols (NXDN, P25, etc.).0 The transceiver can be operated with a combination of different system types, such as Conventional and Trunking.0 Even if a failure occurs, such as the deterioration of the sensitivity of the main transceiver, or the lessening of the transmitpower, the other transceivers can be operated continuously as substitute transceivers.0 Multiple transceivers can receive audio simultaneously and each transceiver can emit the audio individually by connectingan external speaker.0 If a Dual Control Head is used, an operator at a remote location can operate the transceiver individually.0 By using Remote Kit for Head (KRK-14H), Remote Kit for RF Deck (KRK-15B), and Remote Control Cable (KCT-71), asystem can be structured with a maximum of 2 Control Heads and a maximum of 3 RF Decks.0 In a Multi RF Deck system, a Control Head can operate each RF Deck.0 If KCH-20R or KCH-21R is used, the channel information of multiple connected RF Decks can be displayed on thetransceiver display.16 MULTI RF DECK/ MULTI CONTROL HEAD16 MULTI RF DECK/ MULTI CONTROL HEADCommon FUNC (K, F)/Ver 2.20 247CONTENTS INDEX
