Global Positioning System (GPS) is the system that allows a user to check the current location of latitude and longitude byreceiving signals from the Global Positioning System satellites orbiting the earth. GPS Position Display is the function toshow the location information on the transceiver display.For example, a forest ranger or forest firefighter can use this function to monitor the current location and report the locationto the base station in order to smoothly perform their tasks smoothly.GPS Position Display has the following functions:0 Displays the current location (latitude and longitude) on the display of the transceiver0 Displays the altitude of the current location on the display of the transceiver0 Automatically toggles the display of the transceiver between displaying the current location (latitude and longitude)and the altitude display (Mobile only)8.1 Configuring the GPS Position DisplayThe functions below related to GPS Position Display can be configured using KPG-D1/ D1N. The functions must beconfigured in the following order.1) Communication portTo use the built-in GPS receiver unit, configure Built-in GPS Receiver/Bluetooth to be enabled.To use an external GPS receiver unit, assign “GPS” to the communication port to which the GPS receiver unit isconnected. (Refer to Available Functions for COM Port.)2) PF keyGPS Position Display needs to be assigned to a key on the transceiver.Pressing the GPS Position Display key causes the transceiver to enter GPS Position Display Mode.The transceiver also enters GPS Position Display Mode if “GPS Position Display” is selected after entering Menu Modeby pressing the Menu key. (Refer to Using Menu Mode.)3) Configuring displays in GPS Position Display Mode0 Latitude and LongitudeThis function can be used to configure whether the latitudinal and longitudinal values appear on the transceiver display.If this function is enabled, the latitudinal and longitudinal values appear on the transceiver display in GPS PositionDisplay Mode. For the convenience of the user, the latitude and longitude display format can be selected from“Degrees, Minutes” and “Degrees, Minutes, Seconds”.If this function is disabled, the latitudinal and longitudinal values do not appear in GPS Position Display Mode.8 GPS POSITION DISPLAY8 GPS POSITION DISPLAYCommon FUNC (K, F)/Ver 2.20 150CONTENTS INDEX
