NoteTo end Transceiver Information Mode, the transceiver must be turned OFF.Configuration using KPG-D1/ D1NConfiguring whether to permit the use of Transceiver Information Mode ( Transceiver Settings > Optional Features> Optional Features 1 > Mode)15.7 Testing or Adjusting the Transmit and Receive Capabilities ofthe Transceiver (PC Test Mode/ PC Tuning Mode)PC Test Mode can be used to test transmit and receive capabilities of the transceiver by using KPG-D1/ D1N.PC Tuning Mode can be used to adjust transmit and receive capabilities of the transceiver by using KPG-D1/ D1N.To test or adjust the transceiver in each mode, the transceiver and a PC with KPG-D1/ D1N installed need to be connectedby using the programming cable. (Refer to Connecting the Transceiver to a PC.)After connecting the transceiver and the PC, clicking the “Test Mode” button on the Program menu in the main window ofKPG-D1/ D1N opens the Test Mode dialog box. By selecting an item from the tuning item list in the Test Mode dialog boxand double-clicking it, the tuning dialog box of the selected item opens.Figure 15-1 Test Mode Dialog BoxNoteRefer to the service manual for operating the transceiver in PC Test Mode and PC Tuning Mode, and instructions on howto adjust transmit and receive capabilities.15 MODE15.6 Checking the Firmware Version (Transceiver Information Mode)Common FUNC (K, F)/Ver 2.20 246CONTENTS INDEX
