SidetoneSidetone sounds from the transceiver when the transceiver can communicate or the transceiver completes a transmission.The volume level of Sidetone can be configured using KPG-D1/ D1N. (Refer to Configuring the Volume Level of VariousTones (Tone Volume).)Table 6-6 SidetoneFunction DescriptionProceed ToneThis tone sounds from the transceiver when a connection to a repeater completes by pressing thePTT switch in a P25 Trunking system or NXDN Trunking system.In a P25 Conventional system, NXDN Conventional system, and DMR Conventional system, thistone is used to prevent missing the beginning of the audio to be transmitted. This tone can beused with Proceed Tone Delay Time at the same time.VOX Proceed Tone This tone sounds from the transceiver when the transceiver starts transmitting by using the VOXfunction.PTT ID Sidetone This tone sounds from the transceiver when the transceiver starts transmitting a FleetSync PTTID and MDC-1200 PTT ID.Alert ToneAlert Tone sounds from the transceiver when the transceiver receives various types of calls, Status Message, or ShortMessage. (Refer to Tones that Sound When the Transceiver Receives a Call.)The volume level of Alert Tone can be configured using KPG-D1/ D1N. (Refer to Configuring the Volume Level of VariousTones (Tone Volume).)Table 6-7 Alert ToneFunction DescriptionSpecial Alert ToneThis tone sounds from the transceiver when the transceiver receives various types of calls, StatusMessage, or Short Message.A maximum of 8 types of tones can be arbitrarily configured or changed. (Refer to Configuring theAlert Tone (Alert Tone Pattern).)Transmit Clear AlertToneThis tone sounds from the transceiver when the transceiver starts transmitting without encryptingaudio data.Site Trunking Alert This tone sounds from the transceiver when the transceiver initiates a site trunking in a P25Trunking system.Ack Wait Enter Tone This tone sounds from the transceiver when a Response Packet is received from the system whensending a P25 Rekey Request in a P25 system.Emergency IndicatorAlert ToneThis tone sounds from the transceiver when the transceiver receives an Emergency message ina P25 system.6 SOUND6.1 Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is ChangedCommon FUNC (K, F)/Ver 2.20 112CONTENTS INDEX