Function Name DescriptionAvailableCommunicationSystems*1High TransmitPowerAnalog Conventional/ P25 Conventional/ NXDN Conventional/ DMRConventional:Selecting a channel configured “Medium” or “Low” for the transmission powerand then pressing the High Transmit Power key switches the transmissionpower to “High”.P25 Trunking/ NXDN Trunking:Selecting a channel in a system configured “Medium” or “Low” for thetransmission power and then pressing the High Transmit Power key switchesthe transmission power to “High”.SeeTransmit PowerALLHome ChannelMigrates to a channel configured as the Home Channel.SeeChanging the Channel with a Single TouchALLHome ChannelSelectDetermines the displayed channel as the Home Channel.NoteHome Channel Select can be configured only in Hold for the HomeChannel key, and the configuration cannot be changed.SeeChanging the Channel with a Single TouchALLHorn Alert (Mobileonly)Toggles Horn Alert between enabled and disabled.SeeControlling Vehicle Operation According to the State of the Horn Alert Port(Horn Alert)ALLIndividualAnalog Conventional:The transceiver enters Selcall Mode of FleetSync or of MDC-1200. In SelcallMode, a call can be initiated by selecting an ID configured in the ID List ofFleetSync or of MDC-1200, or by directly entering an ID.NXDN system/ P25 system/ DMR Conventional:Enters Individual Call Mode in an NXDN system, P25 system or DMRConventional. In Individual Call Mode, a call can be initiated by selecting a UnitID registered in the Individual ID List or by directly entering a Unit ID.See0 P25 FUNC (Conventional) Making an Individual Call0 P25 FUNC (Trunking) Making an Individual Call0 NXDN FUNC (Conventional) Making an Individual Call0 NXDN FUNC (Conventional) Initiating an Individual Call After Ensuring Thatthe Target Party Is Available for Communications (Individual CallAcknowledge Request)0 NXDN FUNC (Trunking) Making an Individual Call (Transmission Trunked)0 NXDN FUNC (Trunking) Initiating an Individual Call After Ensuring That theTarget Party Is Available for Communications (Message Trunked(Enhanced))Analog ConventionalP25 ConventionalP25 TrunkingNXDN ConventionalDMR ConventionalNXDN Trunking19 CONFIGURATION FOR EACH FUNCTION19.1 Available Functions for the PF KeysCommon FUNC (K, F)/Ver 2.20 399CONTENTS INDEX
